MPS1620P Studio Monitor

The MPS 1620P studio monitor feature a long stroke 6.5” driver and a low compression 1” dome tweeter to provide impressive sound impact for high resolution “sound productions”

The dual channel power amplifiers drive the bass-midrange and high frequency sections with great precision and full control of signal dynamics.

The MPS1620P can operate both as a sealed or a ported loudspeaker due to the removeable “port plug system” at the rear side of speaker.

When operating with subwoofer, the choice of sealed box configuration and filter set to “normal” will provide the classic M&K Sound sub/sat crossover configuration, while when using the MPS1620P as a stand-alone monitor, the ported configuration with filter set to “full-range” will extend bass response and provider precise “broad band” response for near field monitor applications.

MPS1620P is a flexible high precision studio monitor to use for reference recordings, editing, processing, and master mixing for music and movie productions.

Specification

Amplifier power bass-midrange:
100watt RMS/200watt peak
Amplifier power high frequency:
50watt RMS/100watt peak
Bass/Midrange:
1 x 6,5” polypropylene woofer
High frequency Drivers:
1 x 1” soft dome tweeter
Frequency Response:
Sealed/normal setting 80-22KHz +/-2dB / (wall or console loaded) 45-22Khz +/-2dB
Ported/normal setting 45-22KHz +/-2dB
Ported/full range setting / (wall or console loaded) 35-22Khz +/-2dB
Total Harmonic distortion:
0,025% into 8 ohms LF channel / 0.025% into 4 ohms HF channel
Signal to noise ratio:
100dB
AC power consumption:
Standby/Average/Max (15W, 30W, 240W)
AC line voltage:
240VAC/50Hz 1A
Input impedance:
unbalanced 11kohm / balanced 22Kohm
Input sensitivity unbalanced
100mV 88dB 1m / balanced 200mV 88dB 1m
Max output level:
106dB/100Hz
Max input:
24dBu balanced
High pass filter:
Fixed 80 Hz (24dB)
Dimensions
Dimensions HxWxD:
12.6 x 8.3 x 11.6” / 321 x 213 x 297 mm
Weight:
20.3 lbs / 9,2 kg
Colors
Finish:
Black satin