Signalz D-TC3 GOLD Signature Interconnect Tonearm 2.0m
Brisbane HiFi 202/14 Trafalgar St, Woolloongabba, 4102에서 픽업 가능
일반적으로 2~4일 후 준비 완료
Signalz D-TC3 GOLD Signature Interconnect Tonearm 2.0m
Brisbane HiFi 202/14 Trafalgar St, Woolloongabba, 4102
14 Trafalgar Street
202
Woolloongabba QLD 4102
오스트레일리아
RCA TO RCA ONLY
POWERBOX REQUIRED
Ansuz develops and manufactures cables based on advanced, cutting edge technologies. Ansuz cables deliver a pure signal flow that unleashes the authentic sound originally intended by the master recording. To achieve this, it is imperative to lower resistance, curb induction and reduce noise floor to a minimum. The more advanced the cable series, the more refined and sophisticated the implemented technologies, and the more transparent, holistic and authentic the resulting soundstage.
Housing – Natural sound reproduction
The housing is surface treated with Ansuz Signature coating. This coating is ensuring an absolutely natural sound reproduction. The Ansuz Signature coating is applied to the housing in a HiPIMS (High Power Impulse Magnetron Sputtering) process, and creates the finest, and most uniform layers of zirconium and tungsten followed by a layer consisting of aluminium titanium nitride and finally a layer of zirconium.
Connectors
Golden connection.
The connectors are made of gold-plated pure copper.
Conductors
Carefully settled signal handling.
The conductors are made of shielded Gold and silver plated copper.
The Tesla coil principle
The key operating principle of the Ansuz Tesla coil is to have two coils wound in opposite directions – one coil and one counter coil. In Ansuz words, this is called “A double inverted coil”. The two coils both carry voltage, and when one of the Tesla coils encounters a voltage spike, a counter spike is activated to eliminate the noise. Since noise spikes are pure voltage carrying virtually no charge, the cancelation is quite good, but not perfect. Adding more Tesla coils in parallel, increases the noise cancellation and the perceived blackness in the music increases significantly along with the purity and clarity of the sound. Ansuz uses various types of Tesla coils, as their individual properties ideally complement and reinforce each other.
Double inverted helix coil
Lowest induction.
Ansuz DIHC technology reflects a key advancement in audio technology and is employed in most of Ansuz cable types. Based on this technology, we wind and configure our audio cables. The idea behind this technology is to ensure the lowest possible induction. When the coil and the counter coil are closely wound in a double helix pattern, induction can be significantly reduced.
Anti aerial resonance coil technology
Prevents airborne noise.
All cables and cable shields act as antennas for unwanted airborne sound waves (RF noise), which impairs the clarity of the authentic audio signal. The Anti Aerial Resonance coil protects the signal from absorbing the airborne RF Noise. This noise is absorbed in the coil and eliminated in the countercoil. The AARC splits the length of the cable into undefined lengths. As a result, the cable is less likely to absorb RF noise, which no longer can bleed into the audio system as annoying ‘white noise’.
Active cable Tesla coil
Active anti aerial protection.
The active cable Tesla coil is wound directly on the outer part of the cable and protects the signal from absorbing the airborne RF noise. This noise is absorbed in the Tesla coil. The active version is about three to four times more efficient than the Passive cable Tesla coil.
Ansuz charged dielectric
Redirects electrical charge.
To provide the best possible signal transmission, Ansuz has implemented this technology in all of its most exclusive series. The idea behind this innovative concept is to electrically charge the insulating layer, which is made of Teflon. Teflon is one of the strongest dielectric materials and ensures the creation of an internal electric field, which makes it possible now to obtain the same charge at a lower voltage.