THOR Technologies Smart Power Station PS10 Power Conditioner
On top of the pristine power produced by the Smart Station we have included our State of the Art, 8 outlet, Smart Board (pat pending). When attached to the Smart Power Station it delivers DOUBLE the protection and DOUBLE the filtration, incorporating our Dynamic Active Tracking Technology. In addition to this there are 3 isolated banks on the Smart Board ensuring there is no “cross talk” or interference between components connected after the Smart Station. Add the 5 separate earth lines which is a hum/loop reducing feature and performance enhancement is almost a given.
This configuration can be argued as being the best combination available for providing pure and precise 240 (or 220) volts to your valuable electrical equipment. Equipment that was designed to run on 240 (or 220) volt power ensuring you get maximum performance and enjoyment for many years. When it comes to minimising risk, we make no wild or glossy promises. Our products do what they say they do - it is that simple!
About THOR Technologies
Thor Technologies Pty Ltd manufactures a premium range of power protection and power filtration products that clean the sine wave, prevent line interference and protect against damaging voltages. In any digitally sensitive equipment this translates into product performance and longevity - getting the most out of your equipment for a long time.
The premium protection offered in THOR products is typically 7 times higher than the industry standard. Perhaps the biggest example is ‘Clamping Voltage’. If power should be 240V, 280V upwards blows components, fries circuitboards, power supplies etc. THOR has a clamping voltage of 275V, the industry standard is 710V, this means the industry standard will not do anything until 710V comes down the line – well and truly after the damage is done.
Examples of inconsistent and 'dirty' power include flickering lights, hums and hisses in speakers and system hangs and lockups. In the home and business environment, air conditioners, washing machines (changing cycles), kettles and florescent lights all contribute to damaging spikes and surges.
- Customised front facia and blue LCD screen
- Double Filtration And Double Protection
Combination Equals Total Power Management
- Pure Unpolluted 240V Sinewave Power 24/7
- Soft Start - Gentle Power Build Up
- Whisper Quiet Servo Motor For Voltage Calibration
- Microprocessor Controls
- Dual Led Display Indicating Incoming Power And Output Power
- 10 Other Led Alerts Showing Various Power Changes Instantly
- Frontline Filtering And Surge Protection Through Power Station
- Double Filter Trap And Double Voltage Protection Through Custom 8 Way Smart Board
- Incorporating Dynamic Active Tracking Filtering Technology
- 3 In 1 Isolation
- 8 Outlets
- Fits on a 5u 19" rack shelf
|Supply Voltage||240/Vac 50Hz|
|Maximum Current Rating||10amps/2400 W (Va)|
|Wave Form||Pure Sine Wave|
|Operating Voltage||180v - 260v|
|Incoming Voltage out of designed range (<180v or >260v)||if input was 270v then output would be approx 250v to 255v|
|Incoming Voltage out of designed range
(<180v or >260v)
|if input voltage was 140v then output would be approx 230v - 235v|
|Safety Approval No.||RCM 5287|
|Model No||PS10 2013|
|Double Filtration and Protection Management||A12 Smart Board included|