• DF-65 Digital Frequency Dividing Network - Trimira
  • DF-65 Digital Frequency Dividing Network - Trimira
1 2

Accuphase

DF-65 Digital Frequency Dividing Network

DF-65 Digital Frequency Dividing Network

Made in Japan

JP

Accuphase

DF-65 Digital Frequency Dividing Network

The Digital Frequency Dividing Network DF-65 harnesses the very best of digital technology in
every aspect, including a high-speed 40-bit floating point DSP. The standard unit configuration
supports signal processing for up to four-way systems. Highly accurate digital filters offer a choice
of 59 cutoff frequency points and up to 96 dB/octave attenuation. Integrated time alignment
function adjustable in 0.5-cm steps, and delay compensator for automatically offsetting any filter
circuit delays. Monophonic output mode provides high versatility for various configurations.

  • High-speed DSP realizes fully digital signal processing in channel divider units
  • Standard configuration allows 4-channel (4-way) system setup
  • 59 selectable cutoff frequency points
  • Highly accurate 96 dB/oct attenuation slope
  • Time alignment function allows delay time setting in 0.5-cm steps
  • Delay compensator offsets signal delays in filter circuitry
  • Further refined MDS++ D/A converter
  • Selectable monophonic output mode for further enhanced specifications

 

 

Specification 

 

Digital Inputs
COAXIAL

Format: IEC 60958/AES3 compliant

Sampling frequencies 32 kHz to 192 kHz (16 to 24 bits, 2-channel PCM)
OPTICAL

Format: JEITA CP-1212 　　　　　

Sampling frequencies 32 kHz to 96 kHz (16 to 24 bits, 2-channel PCM)
HS-LINK

Connector: RJ-45, HS-LINK cable

 

Ver. 1 Sampling frequencies 32 kHz to 192 kHz (24 bits, 2-channel PCM)

Ver. 2 Sampling frequencies 32 kHz to 384 kHz (32 bits, 2-channel PCM) 
(352.8 kHz and 384 kHz are converted to 176.4 kHz and 192 kHz respectively.)
Analog Input
 Maximum Input Level  3.7 V (1 kHz, 2.5 V output)
Input Impedance
BALANCED: 40 kilohms
LINE: 20 kilohms
A/D converter
Principle 1-bit delta sigma modulation
Sample Frequency 176.4kHz
Quantization 24bitz
Digital Output
 HS-LINK Connector: RJ-45, dedicated HS-LINK cable
Frequency Response


2.0 to 50,000 Hz            +0             –3 dB
D/A Converter
Quantization
 32 bits
STEREO Operation
 4MDS++ type
MONO Operation
 8MDS++ type
THD 0.0007% (20 to 20,000 Hz)
S/N Ratio
  STEREO Operation MONO Operation
COAXIAL / OPTICAL 121 dB 123 dB
HS-LINK 121 dB 123 dB
Analog Input 116 dB 117 dB
Dynamic Range 118 dB
Channel Separation 108 dB (20 to 20,000 Hz)
Slope Characteristics

6 dB/octave,   12 dB/octave,  18 dB/octave

24 dB/octave, 48 dB/octave, 96 dB/octave 　　　　　　　　　

＊When cutoff frequency is 10 Hz: 48 dB/octave, 96 dB/octave not available

20 Hz: 96 dB/octave not available
Delay (converted into distance)

0 to ±3,000 cm (0.5-cm steps)

＊ Independent settings for left and right possible. 
＊ Delay value range limit (absolute value) for all channels is 3,000 cm
Level Adjustment Range
"Analog ATT" OFF: –40 to + 12.0 dB (0.1-dB steps) 
"Analog ATT" ON: –50 to + 2.0 dB (0.1-dB steps)


＊Independent settings for left and right possible.


Output 
Voltage/
Output Impedance
BALANCED: 
2.5 V, 50 ohms, balanced XLR connector
LINE: 
2.5 V, 50 ohms, RCA-type phono connector
Minimum Load Impedance
BALANCED/LINE 600 ohms
Power Requirements 120/220/230 V AC, 50/60 Hz
Power Consumption 31 watts
Maximum Dimensions

Width 465 mm (18.31˝)

Height 151 mm (15.95˝)

Depth 396 mm (15.59˝)
Mass

15.1 kg (33.3 lbs) net

21.0 kg (46.3 lbs) in shipping carton
查看完整详细信息

  • 免运费

    Brisbane HiFi 为订单金额超过 1000 澳元的澳大利亚境内提供免费送货服务。

  • 无忧交流

    Brisbane HiFi 对未开封的商品提供 30 元全额退款，并享受制造商的全额保修。